Electric agricultural gate Pro 4.0/6 Width 4.00 m, height 6.10 m, kit without motor and switch

1. determine the dimensions
Determine the clear width "B" of the opening and the planned height "H" to the lower edge of the mounting bracket. If the dimensions determined fall between 2 dimensions on the price list, order the door with the next larger dimensions. Specify when ordering: Operation on the right "Option R", operation on the left "Option L". The height of the farm gate can be reduced by leaving some material wound up on the top tube. When open, the height of the agricultural doors is reduced by 100 mm from the bottom edge of the mounting bracket. For example, a door with an order height of 4.1 m (Hmax = 4.1 m) leaves a free passage height of 4.00 m when rolled up.

2. checks at the installation site
Make sure that there are no obstacles (gutters, drainpipes, door fittings, etc.) obstructing the installation of the top brackets and the side guide rails.

3. bottom end lip
Wind protection agricultural doors are supplied as standard with a 14 cm gray bottom lip. Bottom end lips with a height of 34 cm and 51 cm are available at an extra charge. . Bottom end lips with heights of 14 cm, 34 cm and 51 cm are available

4. drive types
Chain drive (5 s / m)

5. colors
Special net available in green, blue, beige, gray, brown and black at no extra charge

The width of the door must be cut to the opening width on site, a remnant can remain wound on the upper tube to compensate for the height.

Width: 4 m
Height: 6.1 m
Weight: 143 kg