High-speed door, height 3.10 m width 5.00 m, with guide rail

1) Steel profile tubes
All high-speed doors are supplied with a tube diameter of 100 mm.

2) Determining the dimensions
The width and height of the ordered high-speed door indicate the dimensions of the actual net. The tubes are 100 mm longer than the net width (50 mm on each side). The maximum installation width corresponds to the nominal width - 3 cm (e.g.: RR3031FS door = max. installation width 2.97 m). For high-speed doors, the operator can be installed on the right or left. Please specify the desired operator side when ordering. The clearance height is reduced by 100 mm.

3) Adjustment
Minimum width: 2.40 m. The height does not need to be adjusted on site (excess net remains wound onto the tube). The width must be adjusted.

4) Bottom end lip
High-speed wind protection goals are supplied with a 14 cm ground end lip as standard. Ground end lips with a height of 34 cm and 51 cm are available at an extra charge.

5) Guide rails
All doors are fitted with side guide rails. This enables the door opening to be closed tightly to the side and allows the user to operate the door even at higher wind speeds.

6) Colors
Special net available in green, blue, beige, gray, brown and black at no extra charge

The width of the door must be cut to the opening width on site, a remnant can remain wound on the upper tube to compensate for the height.

Width: 5 m
Height: 3.1 m
Weight: 113 kg